Fayat DYNAPAC CC1400C - Working Mode, Vibration with Dual Amplitudes (Optional) (CC1300 VI - 1400 VI with V2403-CR (Tier 4 F; Stage V) Engine)

Machine description
4812164601_C.pdf2023-01-05
3
Fig. Working mode - Vibration both
drums, low amplitude
Working mode, Vibration with dual amplitudes
(Optional) (CC1300 VI - 1400 VI with V2403-CR
(Tier 4f / Stage V) engine)
- The speed changes automatically from medium to
high on activation of vibration with low amplitude,
provided that high has not already been selected.
- The speed decreases automatically from high to
medium, on activation of vibration with High amplitude
if medium speed has not already been selected.
- Edge cutter or chip spreader can only be used at
High amplitude.
Fig. Working mode - Vibration both
drums, high amplitude (AVC selected)
3
57