Fayat DYNAPAC CC1400C - Chip Spreader

Safety (Optional)
4812164601_C.pdf 2023-01-05
Chip spreader
The machine must not be lifted or transported on
another vehicle with chips in the chip spreader.
The weight for the chip spreader is specified on
the unit rating plate. This weight is not included in
the machine weight specified on the lifting plate.
The machine must not be lifted or transported on
another vehicle with chips in the chip spreader.
The weight for the chip spreader is specified on
the unit rating plate. This weight is not included in
the machine weight specified on the lifting plate.
Fig. Chip spreader
(CC1100C VI - CC1200C VI)
The operator must make sure that nobody is
in the area of operation while the machine
is in use.
The operator must make sure that nobody is
in the area of operation while the machine
is in use.
The machine must NOT be lifted from a
single-point lift if the chip spreader is fitted.
(CC1100C VI - CC1200C VI only)
The machine must NOT be lifted from a
single-point lift if the chip spreader is fitted.
(CC1100C VI - CC1200C VI only)
Risk of crushing and pinch injuries.
The chip spreader has rotating parts.
Risk of crushing and pinch injuries.
The chip spreader has rotating parts.
Fig. Chip spreader
(CC1300C VI - CC1400C VI)
The chip spreader must be reset in transport
mode after it has been used.
The chip spreader must be reset in transport
mode after it has been used.
Fitting the chip spreader changes the total length
of the machine.
Fitting the chip spreader changes the total length
of the machine.
10