Machine description
4812164601_C.pdf2023-01-05
Operator help when starting
To start the diesel engine requires the following
conditions to be met:
- Activated parking brake
- Control lever in neutral
- Engine speed selector in low position (Low = idling).
Applies only to CR engines (electronically controlled
engines) and there is no operator assistance here.
For conditions that are not met and operator
assistance is available, respective symbols are shown
on the display during attempted start-up.
Operator help Workmode
The working mode must be selected to activate
vibration. This also applies to the options edge cutter
and chip spreader.
Operator assistance (and the three LED indicators on
the working mode selection button) indicate if
activation is attempted without the working mode
being selected.
61
To Next Page
Loading...
