EasyManua.ls Logo

Fayat DYNAPAC CC1400C - Page 68

Fayat DYNAPAC CC1400C
239 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Machine description
4812164601_C.pdf 2023-01-05
Level 3
If the symbol (1) on the display Flashes, Red warning
lamp is lit and error code SPN 3701 / FMI 15 is
launched in the error code list, a Parked regeneration
is required.
Satisfy the conditions for Parked regeneration and
perform this immediately.
If not action is taken, the engine loses power.
Level 4
If the symbol (1) on the display Flashes, Red (5)
warning lamp is lit and error code SPN 3701 / FMI 16
is launched in the error code list, a Parked
regeneration is required. This can only be carried out
with a Kubota service tool.
Level 5
If the symbol (1) on the display Flashes, Red (5)
warning lamp is lit and error code SPN 3701 / FMI 00
is launched in the error code list, a full DPF filter
service is required. This can only be carried out by an
accredited Kubota representative.
Fig. Regeneration required
9. Elevated exhaust gas temperature
under regeneration
7
An Automatic regeneration can only occur when the
machine is run and only on levels 1 and 2.
Symbol (9) is shown on the display during
regeneration. This indicates an elevated exhaust gas
temperature during an ongoing regeneration.
52

Table of Contents

Related product manuals