FENDT 926 Vario User Manual

21
OPERATION
2.12 Operating console, right side
Operation_Pic_number:1
Text-module
A = Vario terminal (see also OPERATION Section 2.13).
B = Additional headlamps (on front of roof; can be switched on only when the headlamps are on -
these then go off).
G = Depth regulation rear power lift.
H = Quick lift rear power lift.
O = Comfort front power lift depth control.
P = Quick Lift, comfort front power lift.
Fig.13
Text-module
Front PTO and front power lift operation (see
also OPERATION Section 10.3, OPERATION
Section 20.3).
PTO ON/OFF
PTO automatic mode
Floating position
EPC automatic mode
Text-module
Rear PTO and rear power lift controls (see
also OPERATION Section 10.1, OPERATION
Section 18).
PTO ON/OFF
PTO automatic mode
Quick insert
Hitch-lift
EPC automatic mode

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available