FENDT 926 Vario User Manual

22
OPERATION
Text-module
Text-module
Text-module
Text-module
Text-module
Text-module
4-WD (see also OPERATION Section 11).
4-WD 100%; ON/OFF
4-WD automatic mode ON/OFF
Differential lock (see also OPERATION
Section 12).
Differential lock 100 % ON/OFF
Differential lock automatic mode ON/
OFF
Front axle suspension (also see OPERATION
Section 13).
Suspension locked
Suspension ON
Tempomat cruise control (see also OPERATI-
ON Section 7.8).
Memory 1
Memorised speed 2
Hydraulic valves (see also OPERATION
Section 17.3).
Hydraulic valve control
The operating functions of the crossgate
lever and the controls on the joystick are
interchanged.
Locking the hydraulic valves
Speed preselection for rear PTO (see also
OPERATION Section 10.1).
PTO neutral
PTO 540
Economy PTO (750)
PTO 1000
2.13 Vario terminal
Operation_Pic_number:1
Text-module
NOTE:
At low temperatures, a red-orange discolou-
ration along with a decrease in contrast and
delayed display may occur for up to 20 minu-
tes.
At high temperatures there may be a loss of
contrast.
Text-module
After the start-up display, the following first main
menu is displayed.
Fig.14

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available