FENDT 926 Vario User Manual

23
OPERATION
First main menu
Operation_Pic_number:1
Text-module
Pressing keys (F1 - F5) gives access to the following functions.
F1 = Comfort front power lift
F2 = Rear EPC
F3 = Electric valves
F4 = Transmission settings
F5 = Switch to 2nd main menu level
Display of prevailing operating status of:
A = Rear EPC
B = Electric valves
C = Cruise control
D = Programmed changes in direction of travel
E = Load limit control
F = Prioritised valve
G = Active on-board computer
H = LBS-ISO function (optional)
I = Front power lift - floating position
K = Variotronic Ti - function display
L = Tractor Management System
M = Hydraulic valve heating
N = Stored engine speed activated
O = Accelerator range
P = Accelerator pedal drive active
R = Measuring fuel consumption
S = Slip control active (optional)
T = Front EPC active
U = Rear EPC active
V = External valve actuation
W = Rear power lift - floating position
Fig.15

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available