235
FAULTS AND REMEDIAL ACTIONS
Text-module
Four-wheel drive and differential lock
Text-module
Suspension
Text-module
4.1.EC Accelerator rotary control va-
lues not within tolerances or no
calibration of accelerator rotary
control.
Auxiliary operation.
4.1.ED Clutch pedal potentiometer va-
lues out of tolerance or clutch
not calibrated.
Auxiliary operation.
4.1.EE Transmission characteristic va-
lues out of tolerance or no cali-
bration of transmission.
Auxiliary operation.
4.1.EF Turboclutch values out of tole-
rance or no calibration.
Auxiliary operation.
4.1.FF Error in transmission EST con-
trol unit.
Auxiliary operation.
Fault code Cause Effect and remedy
5.1.31 100% 4-WD button faulty. '4-WD automatic mode' available only.
5.1.32 Key for automatic 4WD faulty. '100% 4-WD' available only.
5.1.33 Faulty 4-WD clutch solenoid
valve.
Function terminated, 4-WD engages.
5.1.34 Steering angle sensor 1 faulty. 4-WD / differential lock automatic mode
Stop not functioning.
5.1.35 Steering angle sensor 2 faulty. 4-WD / differential lock automatic mode
Stop not functioning.
5.1.51 100% differential lock button
faulty.
Only 'Differential lock automatic mode'
function available.
5.1.52 Key for automatic differential
lock faulty.
'100% differential lock' is only function
still available.
5.1.53 Differential lock solenoid actua-
tion faulty.
End of function, differential lock not dis-
engaging.
5.1.54 Left brake pedal switch faulty. '100% differential lock' is only function
still available.
5.1.55 Right brake pedal switch faulty. '100% differential lock' is only function
still available.
Fault code Cause Effect and remedy
5.1.61 Front axle suspension position
sensor faulty.
Front axle suspension does not function.
Possible to continue without suspension.
5.1.62 Front axle suspension "Raise"
solenoid actuation faulty.
Front axle suspension does not function.
Possible to continue without suspension.
5.1.63 Incorrect activation of solenoid
valve 'lower'for front axle sus-
pension.
Front axle suspension does not function.
Possible to continue without suspension.
5.1.64 Front axle suspension on/off
key defective.
Front axle suspension does not function.
Possible to continue without suspension.
5.1.65 Lock front axle suspension key
faulty.
Locking of front axle suspension no lon-
ger possible.
5.1.6 E No calibration of position sen-
sor.
Front axle suspension does not function.
Readjust position sensor.
Fault code Cause Effect and remedy
To Next Page
Loading...
Need help?
General
