46
ZMT-ZMTE
Rev. 5.1
TRANSPORT AND INSTALLATION
4.5
4.6
04-Rimozione imballo (ZM-ZMTE)
5) Attach the machine at the points indicated by the arrows.
6) It is extremely dangerous to attach the machine to points that are not authorised in this manual.
7) Cut all the metal wires fastening the machine and its parts to the wooden box and unblock the fastening screws
that are blocking the support feet.
8) Lift the machine with a lifting device/hoist of adequate capacity, removing it from the wooden box and lowering
it slowly. With this type of attachment the machine tends to position itself horizontally, therefore lay it down
carefully on the oor.
To Next Page
Loading...