GENERAL SAFETY INSTRUCTIONS
Designated use
The valve terminal types 03/05 described in this
manual are designated exclusively for use as
follows:
• for controlling pneumatic and electrical
actuators (valves and output modules)
• for interrogating electrical sensor signals by
means of the input modules.
Use the valve terminals only as follows:
• as designated in the instructions
• in technically faultless condition
• without any modifications.
The specified limit values for pressures, tem-
peratures, electrical data, moments, etc. must be
observed when additional commercially-available
components such as sensors and actuators are
connected.
Please comply also with national and local safety
laws and regulations.
VIFB13 - 03/05 General safety instructions
9701 NH IX
To Next Page
Loading...
