Festo FB13 - General Connection Principles; Cable Selection - Field Bus Cable

Contents
3.1 GENERAL CONNECTION
PRINCIPLES 3-3
Cable selection – field bus cable 3-4
Cable selection – operating voltages 3-4
Connecting the cables to the
plugs/sockets 3-5
3.2 FIELD BUS NODE 3-7
Opening and closing the node 3-7
Configuring the valve terminal 3-10
Address selector switch 3-12
Summary of possible station
addresses/station numbers 3-13
Field bus baud rate and
field bus length 3-15
3.2.1 Type 03: Connecting the
operating voltages 3-15
3.2.2 Type 05: Connecting the
operating voltages 3-22
3.3 CONNECTING THE PROFIBUS
DP INTERFACE 3-29
3.3.1 Screening connection 3-30
3.3.2 Cable termination 3-31
3.4 CONNECTING THE
INPUT MODULES 3-32
Pin assignment 3-34
3.5 CONNECTING THE
OUTPUT MODULES 3-35
Pin assignment 3-37
VIFB13 - 03/05 3. Installation
3-2
9701 NH