Configuration with STEP 7 V2.x or
NCM S7-PROFIBUS V2.x
Prerequirements
• The type file must be in the appropriate
directory of your programmer/PC.
• The menu ”Configure hardware” must be
accessed.
• The DP master must be active in the rack.
• The mask ”Characteristics - DP master” must
be processed.
Menu sequence: ”Process” - ”Object charac-
teristics” - ”SINEC L2”.
• The master system must be opened in the
rack. Either CPU with integrated DP interface
or CP processor.
Menu sequence:
”Process” - ”Master system” - ”Open”.
Carry out the following steps in order to add a
valve terminal to the DP master and in order to
configure it. The following diagrams show entries
of a typical valve terminal configuration.
VIFB13 - 03/05 4. Commissioning
9701 NH 4-39
To Next Page
Loading...
