Contents and general instructions
XI
Festo P.BE-SPC11-SYS-ASI-EN en 0203NH
Notesontheuseofthismanual
This system manual contains basic general information on
operating, fitting, installing and commissioning the SPC11.
Special information on installing and commissioning the
SPC11 in conjunction with the drive you are using can be
found in the manual “Drive-specific supplement.”
Description
Title Contents
System manual
SPC11 Soft Stop electronics/
pneumatics (this manual)
P.BE-SPC11-SYS-ASI-... General instructions on installing
and commissioning
Drive-specific supplement for oper-
ating the SPC11 with a certain drive
(e.g. DSMI-...)
P.BE- SPC11-...-... Special installat ion and commis-
sioninginstructionsaswellaspara-
meter settings for the relevant
drive.
1)
1) These manuals co ntain the permitted drive-valve combinations, cylinder diameters, lengths
and mass loads as well as the parameter settings valid here for the SPC11.
Please note
For installation and commissioning you will require the
system manual as well as the manual “Drive-specific sup-
plement” for the drive used.
To Next Page
Loading...
Need help?
General
