Operator‘s Manual for instrument types MP0R 23
Data Transmission
8 Data Transmission
The current reading and the values stored in the measurement data
memory of the instrument can be transmitted to a PC. The USB driver and
the USB interface cable are included in delivery.
Transmission via USB-cable connection
Both commercial or one's own data processing programs can be used to
process the data exported by the instrument. Information regarding import
and processing of the data using such programs may be obtained from the
respective manuals for these programs.
8.1 Prerequisite for data transmission
1. Installing the USB driver (from shipment) on the computer. Therefore
use the Support CD from the shipment. Select "MP0R" from the CD
menu. Click on the button Install in the open window. The USB driver
will install automatically. When finish close the installation window and
the CD menu.
2. Connect the instrument to the computer via USB interface cable (from
shipment).
Data are transmitted directly
via an USB-cable connec-
tion from the instrument to
the computer.
MP0R_DataTrans_en.fm Seite 23 Donnerstag, 24. März 2011 6:46 18
To Next Page
Loading...
