Operator‘s Manual for instrument types MP0R 39
Instrument Settings
Free-Running Display mode - Menu 5
When making measurements with the Free-Running Display mode, the
coating th
ickness distribution across the surface can be determined simply
by moving the instrument/probe along the surface.
Features of the Free-Running Display mode
• The readings are displayed continuously.
• The readings may not accepted automatically or manually.
• The readings are transmit continuously via USB interface if in menu 3
"FrL 1" are set.
• The measurement data are not evaluated statistically.
Call up instrument setting menu see description on page 31.
Please Note!
The Auto-switch OFF (OFF, menu 4) doesn‘t work in the Free-Running
Display mode!
Switch the Free-Running Display mode off if you does not use it any
longer. Otherwise the batteries will go empty very fast!
Switching ON and OFF the Free-Running Display mode
Calling the instrument setting menu 5 to switch the mode ON.
Calling the instrument setting menu 5 again to switch the mode OFF.
To Next Page
Loading...
