FISCHER PERMASCOPE MP0R - Display Illumination - Menu 4

38 Operator‘s Manual for instrument types MP0R
Instrument Settings
Call up instrument setting menu 4 see description on page 31.
Display illumination - Menu 4
Switch display illumination ON or OFF.
Call up instrument
setting menu see description on page 31.
Mode Default setting Further settings
Std,
SSPC,
90.10
= short switch-off
time, approx. 1 minute
= long switch-off time,
approx. 5 minutes
Mode Default setting Further settings
Std,
SSPC,
90.10
= 
display illumination ON
= 
display illumination OFF