30 Operator‘s Manual for instrument types MP0R
Instrument Settings
9 Instrument Settings
The display menu contains several topics for instrument settings. The
following instrument settings are possible:
Settings/selections in the instrument setting
menus
Para-
meter
Menu
no.
Page
Measuring mode
• Std (common coating thickness measurement)
• 90.10* (coating thickness measuring according the
"Performance Standard for Protective Coatings" from
the International Maritime Organization)
• SSPC* (coating thickness measuring in compliance
with the SSPC-PA2 specification from the Society for
Protective Coatings)
* reduced instrument settings
132
Lock function for the calibration functions ( , )
133
Block size - number of single readings collected to a
block.
133
Display resolution - number of numerals after the deci-
mal point in the display
134
Data storage enable/disable 1 34
Dimension unit (µm, mils) 3 34
Measurement data display (coating thickness value,
count rates)
335
Acoustic signal enable/disable for measurement accept 3 35
Test method selection (for DUALSCOPE instruments
only)
336
Data transmission in the Free-Running Display mode 336
Data selection for transmission (single readings, mean
values)
437
To Next Page
Loading...
