Operator‘s Manual for instrument types MP0R 9
Measurement
3.2 Scroll through the single readings
Display single readings in the instrument data memory.
Before you start
Instrument is switched on.
Procedure
1. Press the [ESC] button for about 2 second for calling the scroll mode.
The number of all single readings stored in the memory will display
temporary.
2. Use the arrow keys [] and [] to scroll through the readings.
An arrow in the displays show the direction to find the next single rea-
ding.
Display : Use the key [] to scroll backward. Scrolls to the newest
readings.
Display : Use the key [] to scroll forward. Scrolls to the oldest read-
ings.
Display - - - - : end of the list.
Leave the scroll mode
Press the button [ESC] or [OK] or do further measurements.
To Next Page
Loading...
