36 Operator‘s Manual for instrument types MP0R
Instrument Settings
Test method selection - Menu 3
Only displayed with instrument type DUALSCOPE
Set
the test method you want to use.
DUALSCOPE instruments combine the magnetic induction and the eddy
current test methods. These instrument types are capable of measuring
non-magnetic coatings or non-conducting coatings on steel or iron as well
as non-conducting coatings on non-ferromagnetic substrate materials.
Call up instrument setting menu 3 see description on page 31.
Data transmission in the Free-Running Display mode -
Menu 3
Continuous data transmission while measurements detection.
Call up instrumen
t
setting menu 3 see description on page 31.
Description of the Free-Running Display mode and how to switch on/off
see page 39.
Mode Default setting Further settings
Std,
SSPC,
90.10
=
The measurement test
method appropriate for
the respective substrate
material is used auto-
matically
= only measurements on ferromag-
netic substrate material with the
magnetic induction test method are
possible
= only measurements on non-ferro-
magnetic substrate material with the
eddy current test method are possible
Mode Default setting Further settings
Std,
SSPC,
90.10
= data transmission
in the Free-Running Display
mode OFF
= data transmission in the
Free-Running Display mode ON
To Next Page
Loading...
