4 Operator‘s Manual for instrument types MP0R
Switching the Instrument ON / OFF
2 Switching the Instrument ON / OFF
2.1 Switching the instrument ON
• Switch the instrument ON by pressing the key [OK]. The set measuring
mode will display temporary.
2.2 Switching the instrument OFF
Measurement data are stored in the instrument memory at all times even
without battery. The measurement data must be deleted from the memory
18.
Auto-Switch-Off
If no action occurs (pressing a key or measurement capturing) the instru-
m
ent will
switch off automatically after a certain time.
Instrument OFF = display is empty.
Change the auto-switch off time setting 37.
Please Note!
For instrument types MP0R only: Remove the orange protective cap before
measurement.
Please Note!
We recommend removing the batteries if the instrument is not used for an
extended period of time to avoid serious damages from battery leakage.
To Next Page
Loading...
