FISCHER PERMASCOPE MP0R - Instrument keys; Main menus - Functional overview

Operator‘s Manual for instrument types MP0R 3
Instrument Description
1.4 Instrument keys
1.5 Main menus - Functional overview
Select the specific menus with [] or [] and press key [OK].
Keys Function
[ESC] • Switching to the scroll mode to scroll through the single read-
ings in the measurement data memory.
• Cancel/exit the menu function, except calibration functions.
[ ], [ ] • Selects menus and parameters settings.
• Sets values for the tolerance limits.
• Scroll mode active: calls the single readings from the measure-
ment data memory.
[OK] • Confirms selection or settings.
• Selects the individual statistic values.
• Press twice to leave the calibration functions.
Normaliza-
tion
Adjustment
on base
material
Storing
correction
O
Calibration
Normaliza-
tion
Foil 1
Storing
correction
CAL
Tolerance
limits
MIN:
set
lower limit
MAX:
set
upper limit
Offset
TOL
Data
transfer
Send
reading
PRT
Statistical
evaluation
s
N
Lowest
reading
Highest
Reading
RES
x
Delete
Delete
current
reading
DEL
Instrument
settings
See chap-
ter Instru-
ment
Settings,
page 30
Menu