Operator‘s Manual for instrument types MP0R 35
Instrument Settings
Measurement data display - Menu 3
Mode that the measurement value is shown in the display. The captured
measu
rement value may display as coating thickness value or as count
rate.
Call up instrument setting menu 3 see description on page 31.
Acoustic signal - Menu 3
Each measurement capture can be indicated audibly with a signal tone.
Call up instrument setting menu 3 see description on page 31.
Mode Default setting Further settings
for service purposes only
Std,
SSPC,
90.10
= measurement
display as coating thick-
ness values
= measurement display as
normalized countrate Xn
= measurement display as probe
countrate X
Mode Default setting Further settings
Std,
SSPC,
90.10
= signal tone on = signal tone off
To Next Page
Loading...
