Flexball Series 3500 - Electronic Propulsion Cabling

Flexball Italiana S.r.l. 47
10.2.2. Cabling of actuators for electronic propulsion systems
These actuators are used where either the motor and the gearbox are electronic.
► Important: in case of single engine installation, use only the connectors for the right engine.
10.2.3. Cabling scheme from actuator to gearbox, from actuator to trim or
from actuator to flap
per invertitore a solenoide
e flap
per invertitore a solenoide
e flap
M. indietro/Flap -
M. avanti/Flap +
Forward
Trim/flap +
Backward
Trim/flap -
Forward: black 1
Flap +: black 2 or grey
Backward: black 2
Flap -: black 1 or black
Vdc gearbox: yellow/green
Vdc trim/flap: brown
Starboard engine Port engine
Clutch
Throttle
Throttle
Clutch
CANBus
Fuse
+12 V
RIGHT ENGINELEFT ENGINE
Throttle
Fuse
Gearbox + ne
utral
Gearbox + neutral
Throttle
Voltage
supply
Data transmission