Flexball Italiana S.r.l. 9
COMMAND
ENGINE 2
WARM/S
ENGINE 1
4. Command station
Command stations are classified as devices for the control of one or two engines, with or without trim/flap
command. Up to three command stations can be mounted in the same installation. Depending on the
application, it is very important to set the dip-switches present on the bottom part of the command station, as
described in sections 4.2 and 8.1 of this manual.
4.1. Dimensions
4.1.1. Command station series 3500
► Important: in case the screws to fix command station to the dashboard panel are not long enough, don’t
open the command station to replace them but ask for an adaptation kit.
To Next Page
Loading...