6 Mounting
6.2 Transducers FLUXUS F502TE
2020-05-29, UMFLUXUS_F502TEV1-5EN
32
Step 1: Disassembly of the transducer mounting fixture Variofix L
• Disassemble the transducer mounting fixture Variofix L (see Fig. 6.9).
Step 2: Fixation of the clasps to the tension straps
• Select the installation instructions according to the supplied clasp:
Band clamp clasp
The clasp is fixed to the tension strap (see Fig. 6.10).
Quick release clasp
The clasp is fixed to the tension strap (see Fig. 6.11).
• Cut the tension strap to length (pipe circumference + at least 120 mm).
Fig. 6.9: Disassembly of the transducer mounting fixture Variofix L
1 – cover
2 – screw
3 – nut
4 – rail
5 – tension strap clamp
Fig. 6.10: Band clamp clasp with tension strap Fig. 6.11: Quick release clasp with tension strap
1
2
3
4
5
5
To Next Page
Loading...
