Mechanical Assemblies
Accutronix MX Maintenance & Spare Parts Manual 130-12000 Revision B • November 2002
STEP 3
Remove handwheel spur gear cap assembly. Note when assembly is
removed, the spur gear (#13-12) is loose in spur gear cap. Remove
spur gear.
STEP 4
Remove the four M6 screws (#13-9) from the worm shaft
plate (#13-2).
4-21
Flow Control Division
Limitorque Actuation Systems
3a
13-12
MX-40
3b
13-12
MX-85/140
4a
13-9
13-2
4b
MX-40
MX-85/140