EasyManua.ls Logo

Fluidigm Juno - Components Included in Shipping Box; Optional Components

Fluidigm Juno
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Juno System: User Guide
Chapter 1: Introducing the Juno System
Components Included in Shipping Box
15
Components Included in Shipping Box
The Juno system (PN 101-6455) includes the following components:
Optional Components
Depending on the type of IFC used with Juno, you will need additional interface plates.
Component Purpose
Juno system with system software
version 3.3 or later
Preamplification and genotyping of DNA through targeted
DNA sequencing preparation
Power cable, >10 A, 2 m, IEC C13 Country-specific power cable to connect the Juno
instrument to the wall socket
The instrument has a connection to protective
earth through the power cord provided by
Fluidigm. Ensure that the electrical receptacle
provides an earth ground before connecting the
power cord.
Use only power cords provided by Fluidigm or power cords
that meet the minimum ratings of 250V/10A, 16AWG and a
length not exceed 2 meters (6 feet).
Cleaning plate Clean the Juno instrument
Interface Plate Loading Fixture The Interface Plate Loading Fixture is used to load interface
plates into the Juno instrument. Store the loading fixture in
its storage container when not in use.
MX Interface Plate The MX Interface Plate (PN 101-6115) adapts Juno for use
with the LP 48.48 IFC, 48.48 Dynamic Array IFCs, and
digital PCR IFCs. Store the interface plate in the storage
container when not in use.
Barrier Tape Applicator and Adapter The Barrier Tape Applicator applies barrier tape to the LP
192.24 IFC. The adapter fits onto the Barrier Tape
Applicator to apply barrier tape to the LP 48.48 IFC.
Component Purpose
SX Interface Plate (PN 100- 6368) Supports the Juno 96.96 Genotyping IFC and has a
silver label.
TX Interface Plate (PN 101-6117) Supports the LP 192.24 IFC and has a blue label.
HX Interface Plate (PN 101-6116) Supports 96.96 Dynamic Array™ and Flex Six™ IFCs and
has a green label.
RX Interface Plate (PN 101-6114) Supports 24.192 Dynamic Array IFC for Gene
Expression and 192.24 Genotyping and Gene
Expression IFCs and has a red label.

Table of Contents

Other manuals for Fluidigm Juno

Related product manuals