Juno System: User Guide
Chapter 1: Introducing the Juno System
System Functions
16
System Functions
The Juno system is an electrically and pneumatically operated desktop instrument. Its
vacuum pump holds the IFC in position, and its embedded PC regulates the instrument's
functions and monitors its performance. The system has a touch panel LCD display. All user-
specific instructions and functions can be controlled through the touchscreen.
The system uses a thermal stack to provide rapid, accurate, uniform heating and cooling.
Air Options
The Juno system has an internal compressor to generate compressed air and draws in
ambient air by default. To use in-house compressed air, attach 1/4-inch tubing into the air
inlet on the back of the system. The allowable pressure input is listed on the back of the
instrument.
For detailed instructions on enabling use of in-house air, see Enable In-House Air on page 46
Regulatory Compliance
The following directives and harmonized standards were used to evaluate the safety and
performance of the Juno system:
General Regulations and Requirements
• 2014/35/EU European Parliament Low Voltage Directive
• 2014/30/EU European Parliament Directive: Electromagnetic Compatibility
Harmonized Standards
• IEC/EN 61326-1
• IEC/EN 61010-1
• IEC/EN 61010-2-010
• IEC/EN 61010-2-081
• UL Standard Number 61010-1 2nd Edition
• CAN/CSA-C22.2 No. 61010-1-04
• CAN/CSA-C22.2 No. 61010-2-010:4
• CAN/CSA-C22.2 No. 61010-2-081-04
To Next Page
Loading...
