Juno System: User Guide
Contents
3
Contents
About This Guide 5
Purpose 5
Safety Alerts for Chemicals 5
Safety Alerts for Instruments 5
Safety Data Sheets 6
Chapter 1: Introducing the Juno System 7
The Juno System 7
Consumables Ordering 7
Components of the Juno System 8
Interface Plates and IFCs 10
System Software 10
Scripts 11
Basic Scripts 11
Advanced Scripts 14
Components Included in Shipping Box 15
Optional Components 15
System Functions 16
Air Options 16
Regulatory Compliance 16
General Regulations and Requirements 16
Harmonized Standards 16
Conformity Symbols on the Instrument 17
Chapter 2: Getting Started with Juno 18
Start the Juno System 18
How to Use the Juno Touchscreen 20
Start a Run 20
Load an IFC 20
Select a Script 23
Schedule the Harvest with the LP 192.24 IFC or
LP 48.48 IFC 24
Run a Script 24
Switch an Interface Plate 26
Install an Interface Plate 29
View System Information 32
Export a Log 33
Shut Down the System and Then the
Instrument 34
Chapter 3: Using Advanced Features
of Juno 36
Log In 36
Log Out 36
Manage Scripts 37
Enable Advanced Scripts 37
Export Scripts to a USB 37
Install Scripts from a USB 38
Modify Scripts 39
To View the Scripts to Modify 39
To Change General Properties of a Script 40
To Change Thermal Properties of a Script 40
To Remove a Script 42
Manage Users 42
Change the Date and Time 44
Update the System 45
Enable In-House Air 46
Appendix A: Troubleshooting 47
Powering ON/OFF 47
Loading 48
Running 49
Cleaning 49
Appendix B: Preventive Maintenance,
Decontamination, and Disposal 50
Preventive Maintenance 50
Preventive Maintenance Recommendations 50
Clean the Thermal Cycler Chuck 50
Clean an Interface Plate 51
Clean the Juno System 53
Clean the Touchscreen 55
Replace the Fuses 55
Decontamination and Disposal 56
Biological Agents 56
Hazardous Chemicals 56
Radioactive Materials 56
To Next Page
Loading...
