Fluidigm Juno - Page 25

Juno System: User Guide
Chapter 2: Getting Started with Juno
Start a Run
25
A status bar at the bottom of the screen displays an estimated time to completion. To
abort the run, tap ABORT:
n
2 At the end of the run, tap EJECT to remove the IFC:
3 Tap CLOSE at the bottom right of the screen to close the tray.
NOTE At the end of the One Step LP-192.24 run, the TX Interface Plate is designed to eject
with the IFC. Remove the IFC and install or switch the interface plate to continue.