Juno System: User Guide
Chapter 2: Getting Started with Juno
Shut Down the System and Then the Instrument
35
5 Verify system and instrument shutdown by noting the power and standby indicator:
NOTE The instrument enters sleep mode if no script is running and is idle for >1 hour. To
exit sleep mode, touch the screen.
6 To restart the system, toggle the power switch to ON. (See Start the Juno System on
page 18.)
Instrument State Screen Power and Standby
Indicator
Normal operation On Lit
Sleep mode Off Blinking
After system shut down Off Lit
After power shut down Off Off
To Next Page
Loading...
