Fluke 5520A - Page 295

5520A-SC600 Option
SC600 Option Specifications
8
8-11
8-9. Trigger Signal Specifications (Pulse Function)
Table 8-7. Trigger Signal Specifications (Pulse Function)
Time Marker
Period Division Ratio [1] Amplitude into 50 Ω (p-p) Typical Rise Time
20 ms to 150 ns off/1/10/100 ≥ 1 V ≤ 2 ns
8-10. Trigger Signal Specifications (Time Marker Function)
Table 8-8. Trigger Signal Specifications (Time Marker Function)
Pulse Period Division Ratio [1]
Amplitude into 50 Ω
(p-p) Typical Rise Time
5s to 750 ns off/1 ≥ 1 V ≤ 2 ns
34.9 ms to
7.5 ns
off/10 ≥ 1 V ≤ 2 ns
34.9 ms to 2 ns off/100 ≥ 1 V ≤ 2 ns
8-11. Trigger Signal Specifications (Edge Function)
Table 8-9. Trigger Signal Specifications (Edge Function)
Edge Signal
Frequency
Division
Ratio
Typical Amplitude
into 50 Ω (p-p)
Typical Rise
Time Typical Lead Time
1 kHz to 10 MHz off/1 ≥ 1 V ≤ 2 ns 40 ns
8-12. Trigger Signal Specifications (Square Wave Voltage Function)
Table 8-10. Trigger Signal Specifications (Square Wave Voltage Function)
Edge Signal
Frequency
Division
Ratio
Typical Amplitude
into 50 Ω (p-p)
Typical Rise
Time Typical Lead Time
10 Hz to 10 kHz off/1 ≥ 1 V ≤ 2 ns 1 µs
8-13. Trigger Signal Specifications
Table 8-11. TV Trigger Signal Specifications
Trigger Signal Type Parameters
Field Formats Selectable NTSC, SECAM, PAL, PAL-M
Polarity Selectable inverted or uninverted video
Amplitude into 50 Ω (p-p) Adjustable 0 to 1.5 V p-p into 50 ohm load, (±7% accuracy)
Line Marker Selectable Line Video Marker