Fluke 5520A - Page 73

Features
Softkey Menu Trees
3
3-15
I
STALL refers to the method of controlling data flow: software control (xon/off), hardware control
(rts/cts) or none.
STALL refers to the method of controlling data flow: software control (xon/off), hardware control
(rts/cts) or none.
K
to L
L
REMOTE I/F (Interface) has selections term (terminal) (factory default) and comp (computer). EOL
(End of Line character) is either Carriage Return/Line Feed (CRLF), CR (Carriage Return) or LF
(Line Feed).
to M
nn016f.eps
Figure 3-4. SETUP Softkey Menu Displays (cont)