Name: Fluke 724
Brand: Fluke
Rating: 4 (1 reviews)

To Next Page

To Previous Page

724/725/726

Calibration Manual

Cal ISO Volts

Connect the UUT as shown in Figure 22.

aal03f.eps

Figure 22. ISO Volts Calibration Connections

From the Calibration Menu, enter the cal step for Cal ISO Volts. The PC displays:

Enter 0 Volts - press space bar to continue

Set the Fluke 5520A to output 0.0000 V, then press the space bar on the PC. After a short

while the PC displays the following a calibration constant and new prompt:

Offset = -324

Enter 30.00 Volts - press space bar to continue

Set the Fluke 5520A to output 30.0000 V, then press the space bar on the PC. After a

short while, the PC displays the following calibration constants and prompt:

diff = (Counts - Offset)

30700 = 30376 - -324

Volts per count = 0.000977

- press space bar to continue

Press the space bar to return to the Calibration Menu.

Other manuals for Fluke 724

Questions and Answers:

Need help?

Do you have a question about the Fluke 724 and is the answer not in the manual?

General