15
Power supply
The Product is powered using a non-removable 7.4 V 2.6 Ah Lithium-ion polymer
rechargeable battery, which is to be charged via the USB port only using the
universal adapter/charger. The rechargeable battery allows operation of up to 17
hours (33% active measurement, 33% computation, 33% ‘sleep’ mode).
The rechargeable battery may also be used to power the sensor when
measurement is carried using the sensor cable and not the wireless module.
Caution
The rechargeable battery is housed in a compartment that is held closed
using a special screw and must never be tampered with. When the
battery can no longer hold charge, the Product must be sent back for
service.
Charging the battery
Note
Charging the non-removable rechargeable battery is possible only via the
Product.
To charge the rechargeable battery, connect the adapter/charger to the Product
USB port (grey) and to the mains supply (see Figure 4-2).
Overview
Power supply
To Next Page
Loading...
