Network Assistant
Documenting Your Network (LAN and WLAN)
107
Renaming a Report
To rename a report:
1. From the File Manager list, select the file you want
to rename.
2. Tap File. From the File menu, tap Rename.
The selected report is highlighted.
3. Use the keyboard to type a new name for the file.
Deleting a Report
To delete a report:
1. From the File Manager list, select the file you want
to delete.
2. Tap File. From the File menu, tap Delete.
3. When prompted, tap
.
The file is deleted from the CompactFlash memory
card.
Performing a Site Survey (WLAN only)
Another way to document your WLAN is to do a site
survey. A site survey can help ensure that your WLAN has
the best coverage and has no “dead spots”.
A site survey enables you to test your network from a
number of specific locations so that you can determine
how to segment the WLAN to balance network capacity,
ensure adequate signal coverage, and to manage
interference.
It is good practice to perform site surveys at the start of a
project. You can save those surveys and use them as
baselines when troubleshooting changes or problems.
For instructions on performing a site survey, see “Site
Survey” on page 95.
To Next Page
Loading...
Need help?
General
