EtherScope™ Series II
Getting Started Guide
56
Network Discovery Test
The Network Discovery test scans the local segment,
looking for what networks are present and how they are
configured. This test enables you to see discovered
networks by IP subnets, NetBIOS domains, and IPX
networks.
1. Select Network Discovery.
The preview pane identifies the types of networks
found and reports the number of networks per type.
EtherScope Network Assistant organizes discovered
networks into the following groups.
•
IP Subnets
•
NetBIOS Domains
•
IPX Networks
Within each group, you can also find out the
number of devices discovered.
2. To view detailed results for Network Discovery:
• In the preview pane, tap the desired network
group.
OR
• Tap .
Subnet details include IP address ranges and
subnet masks, while domain details identify
master browsers and domain controllers.
3. If you need to quickly locate a device within your
network environment, use the Find facility. Do the
following:
a. Tap inside the text entry box. Use a remote
keyboard or tap to display the virtual
keyboard and enter a full or partial name,
IP address or MAC address.
b. Tap
to begin the search.
To Next Page
Loading...
