Network Assistant
Accessing the Instrument Remotely (LAN only)
113
• Unicast
• Retries
• Errors
You can change the sampling period by selecting a time
interval from the Update every box.
You can look at Tx packets, Rx packets, or both by
selecting one of the option buttons.
Tx/Rx Rate
The Tx/Rx Rate test shows you the number of packets
that the selected device is sending and receiving at
various transmission rates.
The information is presented in tabular form and is
continuously updated according to the interval specified
in the Update every box. You can change the sampling
period by selecting a different time interval from this
box.
Accessing the Instrument Remotely
(LAN only)
You can control EtherScope Network Assistant and view
its result screens from a remote location. The instrument
contains a Virtual Network Connection (VNC) server that
is used for remote access.
To access the remote user interface:
1. Start Internet Explorer.
Note
EtherScope Network Assistant supports Internet
Explorer only.
To Next Page
Loading...
Need help?
General
