Network Assistant
Before You Begin
27
Status LEDs
Five status LEDs are located at the top of the front panel,
as shown in Figure 4:
LINK
UTILIZATION
COLLISION
ERROR
TRANSMIT
avs01f.eps
Figure 4. Status LEDs
These LEDs provide instant, visible feedback on the state
of your network and indicate conditions relative to the
type of of interface (LAN RJ-45 or wireless) you are
testing.
This section describes the LEDs for wired LAN and
wireless LAN interfaces.
LAN (RJ-45 or Fiber) Interface LEDs
LINK LED
• Green (solid): indicates that a link is present for all
speeds.
• Off: indicates that no cable or no link is present.
To Next Page
Loading...
