Fortinet FortiVoice 200D - Page 110

Fortinet Technologies Inc. Page 110 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
caller-number <string> Enter the phone number that will appear on the called
phone.
dns-srv-record {enable |
disable}
If you entered the VoIP provider’s domain name in the
SIP server field, enable to translate the domain name and
obtain the SIP port.
disable
max-incoming-channels
<channel_int>
Enter the mximum channel numbers for incoming calls. 0
max-outgoing-channels
<channel_int>
Enter the maximum channel numbers for outgoing calls. 0
number-pattern
<pattern_str>
Enter the pattern for outgoing call numbers.
For information on pattern-matching syntax and pattern-
matching examples, see “pbx number-management” on
page 57.
password <pwd_str> Enter the password provided by the provider for the
FortiVoice unit to register with the SIP server.
proxy {enable | disable} Enable to activate the proxy server settings.
Some service providers use proxy servers to direct its
traffic. If this is the case, your registration request will go
to the proxy server first before reaching the registration
server.
enable
proxy-port <integer> Enter the port number of the proxy server. 5060
proxy-server <string> Enter the proxy server’s domain name or IP address. For
example, 172.20.120.11 or voip.example.com.
proxy-transport {tcp | tls |
udp}
Enter the transport protocol used for the registration. udp
realm <string> Some VoIP service providers’ SIP servers authenticate
the PBXes that register with them by requesting the
name of the host performing the authentication. If this is
the case with your VoIP service provider, enter the name
of the host performing the authentication provided by
your VoIP service provider.
register-expiry <string> Enter the SIP registration expiry in minutes. 2
register-string <string> If you enter user-define for registration {disable |
registra-server | standard | user-define}, enter the
registration string which usually has the following
formats:
register => user[:secret[:
authuser]]@host
[:port][/extension]
or
register => fromuser@fromdomain:
secret@host
or
register => fromuser@fromdomain:secret:
authuser@host:port/extension
For example, a string could be: register => 2345:
password@mysipprovider.com/1234
Variable Description Default