Fortinet FortiVoice 200D - Page 111

Fortinet Technologies Inc. Page 111 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
registration {disable |
registra-server | standard |
user-define}
Enter the SIP registration information from the VoIP
service provider. You can receive calls after registering
with the SIP server of the service provider.
• Disable: Disables registration with the service
provider. This trunk is not usable.
• registra-server: enter the registration
information from the VoIP service provider. Also
configure registra-port <int>, registra-server
<host/ip_str>, and registra-transport {tcp | tls | udp}.
• Standard: Enter to use the standard registration
method which automatically registers with the SIP
server of the VoIP service provider.
• User-define: Enter to use your own registration
string. Also configure register-string <string>.
disable
registra-port <int> Most SIP configurations use TCP or UDP port 5060 for
SIP sessions. If your provider uses a different port for SIP
sessions, enter the port number.
This option is available if you enter registra-server
in registration {disable | registra-server | standard | user-
define}.
5060
registra-server
<host/ip_str>
Enter the VoIP provider’s SIP registration server domain
name or IP address. For example, 172.20.120.11 or
voip.example.com.
This option is available if you enter registra-server
in registration {disable | registra-server | standard | user-
define}.
registra-transport {tcp |
tls | udp}
Enter the transport protocol used for the registration.
This option is available if you enter registra-server
in registration {disable | registra-server | standard | user-
define}.
udp
sip-port <int> Most SIP configurations use TCP or UDP port 5060 for
SIP sessions. If your provider uses a different port for SIP
sessions, enter the port number.
5060
sip-server <host/ip_str> Enter the VoIP provider’s domain name or IP address.
For example, 172.20.120.11 or
voip.example.com.
sip-setting <name> Enter the SIP profile to apply the supported phone
features and Codecs for the trunk.
For more information, see “system sip-setting” on
page 101.
status {enable | disable} Enable to activate the SIP trunk. enable
username<name_str> Enter the user name provided by the provider for the
FortiVoice unit to register with the SIP server.
Variable Description Default