Fortinet FortiVoice 200D - Page 58

Fortinet Technologies Inc. Page 58 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
Syntax
config pbx number-management
set default-sip-password <string>
set default-voicemail-pin <string>
set dial-0-action {call-manager | call-operator | nothing}
set number-pattern <pattern>
set operator-extension <string>
set prohibited-prefix <string>
set ring-duration <int>
set speed-dial-pattern <string>
set support-extension <string>
set unrestricted-prefix <string>
end
Variable Description Default
default-sip-password
<string>
Enter the password used for configuring your SIP
phone from the phone or the Web. You need the
phone's IP to access it from the Web.
voice#321
default-voicemail-pin
<string>
Enter the password for the extension user to access
voicemail.
123123
dial-0-action {call-
manager | call-operator |
nothing}
Enter the action taken by the FortiVoice unit when
dialing 0.
nothing
number-pattern
<pattern>
Enter the extension number pattern. For example,
NXXX is any four digit number as long as the first digit is
2 or higher and 7XXX is a four digit number that always
starts with 7. This pattern will be followed when
creating extensions.
X.
operator-extension
<string>
Enter the FortiVoice operator’s extension.
prohibited-prefix
<string>
Enter the phone number prefix that you want to ban,
such as 900.
900
ring-duration <int> Enter the time in seconds for the FortiVoice unit to ring
before it responds to a call.
20
speed-dial-pattern
<string>
Enter the speed dial pattern. For example, *3XX is any
three digit number that starts with 3. This pattern will be
followed when configuring speed dials.
*3XX
support-extension
<string>
Enter the FortiVoice technical support extension.
unrestricted-prefix
<string>
Enter the allowed phone number prefix, such as 800. 800 866 877
888