Fortinet FortiVoice 200D - Page 71

Fortinet Technologies Inc. Page 71 FortiVoice 200D/200D-T v2.0 MR1 CLI Reference
call-from {any | external |
internal}
Enter the source of the incoming calls: internal,
external, or any.
internal
call-to {any | external |
internal}
Enter the source of the outgoing calls: internal,
external, or any.
internal
region {any | internal |
international | local |
long_distance | other |
unrestricted}
Enter the call region, such as international or long
distance.
local
report-column {caller |
receiver}
Enter the source of the call statistics: from caller or
receiver.
caller
sort-column {calls | cost ||
duration | report-column}
Enter the value for filtering the call information. The
caller or receiver with the higher value moves to the top
of the table.
If you enter report-column, the sort column value is
equal to what you enter for report-column {caller |
receiver}.
separate-tables {default |
disabled | enabled}
Depending on the query values, if a report table is too
long, it can be divided into separate tables. Entering
default keeps the pre-defined table settings of the
query values and is recommended.
You can select to enable or disable the pre-defined
table settings of the query values, although this is not
recommended.
default
file-format {html | pdf} Enter the file format of the generated report attached to
the email sent to designated recipients.
See recipients <email_addr>.
pdf
period-relative <period> Enter the time span of log messages from which to
generate the report. The time span is listed.
Enter a relative time, such as today, yesterday,
last n hours, and so on. If you enter an option with
an unspecified “N” value, enter the number of hours,
days or weeks in period-relative-value <int>.
today
period-relative-value
<int>
If you enter an option with an unspecified “N” value in
period-relative <period>, enter the number of hours,
days or weeks.
0
ratings <string> Enter the call rate profile for the report. The rates apply
to the calls in the report.
See pbx rating-table.
recipients <email_addr> Enter the email addresses of the people who will
receive the report notifications. Separate the addresses
with comma.
Variable Description Default