Fronius Symo Service Manual

155
EN
Replacing other
components
If the following components are faulty, the entire inverter must be replaced:
- Housing parts (excluding covers)
- Inductors
- Heat sinks
- Seals (not including the seals on the covers)
The covers (Datcom cover and power stage set cover) can be replaced as a component
with an injection-moulded seal.
WARNING! Observe the safety rules (see the beginning of the "Safety" section)

Fronius Symo Specifications

General

THD	< 3 %
Number of MPP Trackers	2
Protection Class	IP65
Frequency Range	50 / 60 Hz
Operating Temperature Range	-25°C to +60°C
Power Range	3.0 kW - 20.0 kW
AC Output Voltage	230 V
Communication	Ethernet
Warranty	5 years
Model	Symo