Fronius Symo - Tools and Measuring Devices; General; Tools Required; Measuring and Testing Equipment

93
EN
Tools and measuring devices
General "Tools and measuring devices" offers an overview and description of all equipment needed
to service the device professionally. This equipment includes:
- Tools required
- Measuring and testing equipment
- Ancillary materials
Tools required - Torx screwdriver, TX20
- Torx screwdriver, TX25
- Slotted screwdriver, 3 mm
- Socket wrench
- Socket wrench insert, 7 mm
- Socket wrench insert, 36 mm
- Flat spanner, 7 mm
- Flat spanner, 36 mm
- Diagonal cutting pliers
- Needle-nosed pliers
- Torque screwdriver with bit insert, 1 - 6 Nm
- Torque ratchet, 1 - 10 Nm
- Allen key, 4 mm
- Allen key, 5 mm
Measuring and
testing equip-
ment
- Digital multimeter
- Safety inspection equipment
Ancillary materi-
als
- Cleaning materials (spray, paper)
- Cable tie types 102 and 200
- Heat conductive foil, TPC (42,0300,3054)
- 5x25 PT screw with seal ring (42,0401,4231)