166
The Contact Current Must Not Exceed 0.5 Ma *).
1 Measuring Device
2 Inverter
6.2 Touchable, Conductive Part Not Connected To
The Ground Conductor
8 Isolated Setup Of Test Piece
9 Measuring Line
Ri 1 - 2 K
Touchable, Conductive Parts Not Connected To The
Ground Conductor
*) These Requirements Comply With Din Vde 0701-0702 And Öve/önorm E8701-1. Also
Refer To The Applicable Requirements And Standards In Your Country.
PE
mA
L1
1
2
9
N
PE L1 N
9
8
6.2
R
i
1-2kΩ
To Next Page
Loading...
