Fronius TransSteel 2200 - Side View

(10)
(11)
(7)
(8)
(9)
(7) MIG/MAG shielding gas connec-
tion socket
For the shielding gas supply to the
welding torch connection (1)
(8) Power switch
For switching the power source on
and off
(9) Ventilation openings (air inlet
vents)
For device cooling, the air filter is
located behind these vents
(10) Mains cable with strain relief
Not prefitted on all models
(11) TIG shielding gas connection
socket
For the shielding gas supply for the
(-) current socket (2)
Side view
(2)(1) (3)
(1) D100 wirespool holder with
brake
For holding standard wirespools
with a max. diameter of 100 mm
(3.94 in)
(2) D200 wirespool holder with
brake
For holding standard wirespools
with a max. diameter of 200 mm
(7.87 in.) and a max. weight of 6.8
kg (14.99 lbs.)
(3) 2-roller drive
39
EN-US