Fronius TransSteel 2200 - Special 4-Step Mode

Special 4-step
mode
"Special 4-step mode" is ideal for welding in higher power ranges. In special 4-step
mode, the arc starts at a lower power, which makes it easier to stabilize.
+ +
I
I-S I-E
GPr SL SL
GPo
Special 4-step mode
Explanation of symbols:
Press the torch trigger Hold the torch trigger
Release the torch trigger
Abbreviations used:
GPr Gas pre-flow time
I-S Starting current
SL Slope: continuous increasing / lowering of welding current
I Main current
I-E Final current
GPo Gas post-flow time
64