Commissioning
Connecting a
MIG/MAG welding
torch
1
Before connecting the welding torch to the power source, equip the welding torch
according to the welding torch Operating Instructions: Fit wearing parts to the torch
body, fit the inner liner.
2
3
Unscrew the knurled screw (1) slightly so that the welding torch can be easily
pushed into the welding torch connection.
4
5
CAUTION!
Danger if the welding torch is not fully
inserted.
The device may be damaged.
▶
After inserting the welding torch,
ensure it is in the correct end position.
53
EN-US
To Next Page
Loading...
