5
CAUTION!
Danger due to welding processes start-
ing unintentionally.
Personal injury and damage to property
may result.
▶
As soon as the power source is
switched on, ensure that the rod elec-
trode does not unintentionally touch
electrically conductive or grounded
parts (such as housing).
Selecting the
desired country-
specific setting
- The country-specific setting of the power source defines the unit (cm + mm or inch)
in which the set welding parameters are displayed
- The country-specific setting can be changed in the Setup menu 2nd level (Para-
meter SEt)
• A description of the SEt parameter and how to adjust the SEt parameter can be
found in section Setup Menu 2nd Level from page 100
Manual metal arc
welding
1
Press the "Process" button to select STICK
2
Set the desired welding current
- Power source is ready for welding
Laying the
hosepacks cor-
rectly
86
To Next Page
Loading...
